Automatic Pellet Press with Rotary Automatic Cleaning Device

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Transport Package: Export Packing
• Specification: customized
• Trademark: Yosion
• Origin: China
• Production Capacity: 5000PCS/Year

Product Description

Introduction:

The automatic pellet press is an automatic equipment for testing the strength of pellets and sinters. It adopts a servo control system. The product complies with GB/T14201-2018 "Blast furnace and direct reduction iron pellets compressive strength Determination", ISO4700 and other standards for testing. Applicable to: Iron and Steel Metallurgy, Pellet Mining, University/Research Institute, Entry-Exit Inspection and Quarantine Bureau.

Features:
 

· The pellet crushing device adopts a servo control system, which can adjust a fixed speed at a constant speed between 10mm/min~20mm/min during the whole test. The national standard recommends 15mm/min±1mm/min to make the test data more Accuracy helps to ensure the sample pass rate and reproducibility. The servo control system can be used continuously and efficiently for a long time with good stability.
· When the equipment meets any of the following conditions, the test ends and the maximum load compressive strength value is obtained during the test. (A) The load drops to 50% of the recorded maximum load value, or appears to be higher than the recorded maximum load; (b) The distance between the press plates drops to 50% of the initial average particle size of the sample.
· Electric magnetic vibrating plate automatic feeding device, pellet crushing and automatic feeding are carried out simultaneously, saving test time;
· Rotary automatic cleaning device, without manual cleaning, automatically completes the cleaning of waste pellets;
· During the test, the test data is displayed in real time, including: each pellet crushing force value, maximum value, minimum value, average value, relative frequency distribution, and pressure curve diagram;
· Long-term storage of test data, historical test data can be inquired in different ways, and test reports can be printed;

·The equipment has a pressure overload protection system to prevent damage to the sensor due to misoperation;

Technical Parameter:
 

Model	YX-PT1000S
Application	Crush the pellets, test pellet strength
Test efficiency	60 pellets takes about 30 minutes
Maximum number of pellets once	120
Platen speed	10-20mm/min
Pellet size	Φ10mm~16mm
Sensor maximum pressure	10KN or 15KN(≥1019.7kgf)
Sensor accuracy	C3(≥0.03%)
Sensor error	≤±0.020%FS
Transmitter accuracy	≥0.1%F·S
Transmitter protection level	IP65
Voltage	AC 220V±5%,50Hz
Power	0.75KW
Weight	120kg

Projescts Reference